参考图片 | 商品 | 描述 | 价格 | 库存 | 购买数量 | 操作 |
|
|
The HV9803B is an open loop average-mode current control LED driver IC operating in a constant off-time mode. The IC features ±2% current accuracy, tight line and load regulation of the LED current without any need for loop compensation or high-side
PDF数据手册
|
1+: | ¥8.415 | 10+: | ¥7.007 | 30+: | ¥6.237 | 100+: | ¥5.357 |
|
库存: | 1000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥8.4
|
|
|
|
The MIC2860-2P is a high-efficiency white LED (WLED) driver designed to drive two WLEDs and greatly extend battery life for portable display backlighting and keypad backlighting in low cost mobile devices. The MIC2860-2P architecture provides the hig
PDF数据手册
|
5+: | ¥7.403 | 50+: | ¥6.182 | 150+: | ¥5.511 | 500+: | ¥4.752 | 3000+: | ¥4.411 | 6000+: | ¥4.268 |
|
库存: | 30000 |
最小起订量: | 5 |
最小包装: | 5 |
递增量: | 5 |
|
-+
合计:¥37.0
|
|
|
|
The CL88030 and CL88031 LED Driver Integrated Circuits (ICs) are intended offline sequential linear LED drivers designed to provide LED power from a utility voltage input.The CL88030/31 devices are designed to drive a long string of inexpensive, low-
PDF数据手册
|
1+: | ¥3.674 | 10+: | ¥2.893 | 30+: | ¥2.563 | 100+: | ¥2.156 |
|
库存: | 29000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥3.7
|
|
|
|
The CL520 is a fixed, linear current regulator designed for driving LEDs at 20mA. With a maximum rating of 90V, it is able to withstand transients without the need for additional transient protection circuitry. It is ideally suited for applications e
PDF数据手册
|
1+: | ¥3.3 | 200+: | ¥1.2771 | 500+: | ¥1.23222 | 1000+: | ¥1.21 |
|
库存: | 15000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥3.3
|
|
|
|
The CL525 is a fixed, linear current regulator designed for driving LEDs at 25mA. With a maximum rating of 90V, it is able to withstand transients without the need for additional transient protection circuitry. It is ideally suited for applications e
PDF数据手册
|
1+: | ¥2.34025 | 200+: | ¥0.90563 | 500+: | ¥0.87384 | 1000+: | ¥0.85811 |
|
库存: | 18000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥2.3
|
|
|
|
The HV9961 is an average current mode control LED driver IC operating in a constant off-time mode. Unlike HV9910B, this control IC does not produce a peak-to-average error, and therefore greatly improves accuracy, line and load regulation of the LED
PDF数据手册
|
1+: | ¥51.909 | 200+: | ¥20.097 | 500+: | ¥19.393 | 1000+: | ¥19.041 |
|
库存: | 12000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥51.9
|
|
|
|
The MIC3203 is a hysteretic, step-down, constant-current, High-Brightness LED (HB LED) driver. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other general illumination applications.
PDF数据手册
|
1+: | ¥29.337 | 200+: | ¥11.363 | 500+: | ¥10.956 | 1000+: | ¥10.758 |
|
库存: | 10000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥29.3
|
|
|
|
The MIC3203 is a hysteretic, step-down, constant-current, High-Brightness LED (HB LED) driver. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other general illumination applications.
PDF数据手册
|
1+: | ¥8.283 | 200+: | ¥3.212 | 500+: | ¥3.102 | 1000+: | ¥3.047 |
|
库存: | 11000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥8.3
|
|
|
|
The MIC3223 is a constant current boost LED driver capable of driving a series string of high power LEDs. The MIC3223 can be used in general lighting, bulb replacement, garden pathway lighting, and other solid state illumination application. The MIC
PDF数据手册
|
1+: | ¥3.3 | 200+: | ¥1.2771 | 500+: | ¥1.23222 | 1000+: | ¥1.21 |
|
库存: | 3000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥3.3
|
|
|
|
The CL8801 is designed to drive a long string of inexpensive, low current LEDs directly from the AC mains. A basic driver circuit consists of the CL8801, four resistors, and a bridge rectifier. Two to four additional components are optional for vario
PDF数据手册
|
1+: | ¥27.874 | 200+: | ¥10.791 | 500+: | ¥10.417 | 1000+: | ¥10.219 |
|
库存: | 32000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥27.9
|
|
|
|
MCP1643 is a compact, high-efficiency, fixed frequency, synchronous step-up LED driver with constant current, that operates from one and two-cell alkaline and NiMH/NiCd batteries. The device can also drive two red/green/yellow series connection LEDs.
PDF数据手册
|
1+: | ¥27.291 | 200+: | ¥10.571 | 500+: | ¥10.197 | 1000+: | ¥10.01 |
|
库存: | 6000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥27.3
|
|
|
|
The HV9967B is an average-mode current control LED driver IC operating in a constant off-time mode. The IC features an integrated 60V, 0.8Ω MOSFET that can be used as a stand-alone buck converter switch, or connected as a source driver for driving
PDF数据手册
|
1+: | ¥3.3 | 200+: | ¥1.2771 | 500+: | ¥1.23222 | 1000+: | ¥1.21 |
|
库存: | 5000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥3.3
|
|
|
|
The MIC3287 is a 1.2MHz pulse-width modulated (PWM) step-up switching regulator that is optimized for constant current white LED driving applications. With a maximum output voltage of 24V and a switch current of over 350mA, the MIC3287 drives a strin
PDF数据手册
|
1+: | ¥8.063 | 200+: | ¥3.124 | 500+: | ¥3.014 | 1000+: | ¥2.959 |
|
库存: | 2000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥8.1
|
|
|
|
The MIC2291 is a 1.2MHz pulse-width modulation (PWM), boost-switching regulator that is optimized for high-current, white LED photo flash applications. With a guaranteed switch current of 1.2A, the MIC2291 easily drives a string of three white LEDs i
PDF数据手册
|
1+: | ¥28.886 | 10+: | ¥24.893 | 30+: | ¥22.517 | 100+: | ¥20.108 | 500+: | ¥19.008 | 1000+: | ¥18.502 |
|
库存: | 5000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥28.9
|
|
|
|
The MIC2860-2P is a high-efficiency white LED (WLED) driver designed to drive two WLEDs and greatly extend battery life for portable display backlighting and keypad backlighting in low cost mobile devices. The MIC2860-2P architecture provides the hig
PDF数据手册
|
1+: | ¥6.864 | 10+: | ¥5.588 | 30+: | ¥4.95 | 100+: | ¥4.323 | 500+: | ¥3.762 | 1000+: | ¥3.575 |
|
库存: | 34000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥6.9
|
|
|
|
The HV9910C is an open loop, current mode, control LED driver IC. The HV9910C can be programmed to operate in either a constant frequency or constant off-time mode. It includes a 15 – 450V linear regulator which allows it to work from a wide range
PDF数据手册
|
1+: | ¥7.854 | 10+: | ¥7.689 | 30+: | ¥7.568 | 100+: | ¥7.458 |
|
库存: | 需询价 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥7.9
|
|
|
|
The HV96001 LED driver targets offline lighting applications requiring wide dimming capability. The device is capable of linear dimming and PWM dimming, with the PWM dimming capable of flicker-free dimming down to 0.1% level and lower.The HV96001 is
PDF数据手册
|
1+: | ¥2.64 | 10+: | ¥2.09 | 30+: | ¥1.848 | 100+: | ¥1.551 |
|
库存: | 6000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥2.6
|
|
|
|
The HV9910B is an open loop, current mode, control LED driver IC. The HV9910B can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8.0 - 450V linear regulator which allows it to work from a wide range
PDF数据手册
|
1+: | ¥18.414 | 10+: | ¥15.521 | 30+: | ¥13.717 | 100+: | ¥11.858 |
|
库存: | 6000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥18.4
|
|
|
|
The MIC3203 is a hysteretic, step-down, constant-current, High-Brightness LED (HB LED) driver. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other general illumination applications.
PDF数据手册
|
1+: | ¥20.999 | 10+: | ¥18.007 | 30+: | ¥16.225 | 100+: | ¥14.421 |
|
库存: | 6000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥21.0
|
|
|
|
The MIC3202 is a hysteretic, step-down, constant-current, High-Brightness LED (HB LED) driver. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other general illumination applications.
PDF数据手册
|
1+: | ¥2.64 | 10+: | ¥2.09 | 30+: | ¥1.848 | 100+: | ¥1.551 |
|
库存: | 1000 |
最小起订量: | 1 |
最小包装: | 1 |
递增量: | 1 |
|
-+
合计:¥2.6
|
|